1350 Aluminium Flat Bus Bar

1350 aluminum flat bus bar has good formability and surface treatment, and its corrosion resistance is the best among aluminum alloys. Because it is pure aluminum, its strength is low. The higher the purity, the lower the strength.

Actual picture of 1350 aluminum bar

Actual picture of 1350 aluminum bar

Characteristics and application scope of 1350 aluminum alloy

1350 aluminum alloy is industrial pure aluminum, which has high plasticity, corrosion resistance, conductivity and thermal conductivity, but its strength is low, heat treatment can not be strengthened, and its machinability is not good. It can be gas welding, hydrogen atom welding and contact welding, and is not easy to braze; Easy to bear all kinds of pressure processing, drawing and bending.

1350 Aluminium Flat Bus Bar

1350 Aluminium Flat Bus Bar

1350 Aluminium Flat Bus Bar

Model: 1350

Thickness: 8-30mm

Width: 40-400mm

Processing: stamping, bending, drilling, thread, polishing

Transport package: export standard wooden pallet and case

Specification: according to customer requirements

1350 aluminum flat bus bar mechanical properties

tensile strength σ B (MPA): ≥ 120 elongation δ 5 (%): ≥ 25 note: longitudinal mechanical properties of bar at room temperature sample size: bar diameter (inscribed circle diameter of square bar and hexagonal bar) ≤ 150 state: aluminum and aluminum alloy extruded bar (≤ 150mm, O, h112 state)

Flatwise Bending Radius

Type of Bar

Alloy and Temper

Thickness  in.

Radius  min.

 

1350-H11

All

1 * thickness

Extruded

6101-H11

0.250-0.750
0.751-1.000

1 * thickness
2 * thickness

6101-T6

0.125-0.375
0.376-0.500

2 * thickness
21/2 thickness

6101-T61

0.125-0.500
0.501-0.749
0.750-1.000
1.001-1.625

1 * thickness
2 * thickness
3 * thickness
4 * thickness

6101-T63

0.125-0.375
0.376-0.500
0.501-1.000

1 * thickness
11/2 thickness
21/2 thickness

6101-T64

0.125-0.750
0.751-1.000

1 * thickness
2 * thickness

6101-T65

0.125-0.500
0.501-0.749

1 * thickness
2 * thickness

Rolled

1350-H12

All

1 * thickness

Sawed plate

1350-H112

All

1 * thickness

Advantages of aluminum flat bus bar manufacturers

  1. The material quality of aluminum busbar shall be strictly controlled during construction. The material of cast aluminum bus and aluminum plate shall not be lower than GB / t1196-93, al99 6 (extra class II) standard.
  2. Check the material appearance, material certificate or inspection report. The surface shall be free of scratch, collision damage, oxidation and rust spots and other defects.
  3. During the loading, unloading and hoisting of aluminum bus, special lifting fixtures are used instead of steel wire rope or chain.
  4. 1350 aluminum buses are stored and stored in the workshop according to specifications and part numbers. Hardened miscellaneous wood isolation support is placed during stacking to ensure that the aluminum buses are not deformed during storage.

1350 aluminum alloy Chemical  Composition

Si

Fe

Cu

Mn

Mg

Cr

Zn

V+Ti

Others

Al.

 

 

 

 

 

 

 

 

Individual

Total

 

Max. 0.10

Max.
0.40

Max.
0.05

Max.
0.01

 -

Max
0.01

Max.
0.05

Max.
0.02

Max.
0.03

Max
0.10

Min. 99.50

The model of 1350 Rectangular/square angle aluminum bus bar

3mm Thick

3x15

3x20

3x25

3x30

3x40

3x50

 

 

 

 

4mm Thick

4x10

4x20

4x25

4x30

4x40

4x45

4x50

 

 

 

5mm Thick

5x20

5x25

5x30

5x35

5x40

5x50

5x60

5x80

 

 

6mm Thick

6x20

6x30

6x40

6x50

6x60

6x80

6x100

6.3x50

6.3x80

6.3x100

7mm Thick

7.6x80

 

 

 

 

 

 

 

6.3x76

6.3x63

8mm Thick

8x11

8x30

8x40

8x50

8x60

8x63

8x80

8x100

8x120

8.1x74

10mm Thick

10x30

10x40

10x50

10x60

10x63

10x80

10x100

10x120

10x125

10x140

10x150

10x160

 

 

 

 

 

 

 

 

12mm Thick

12x60

12x80

12x100

12x120

12x125

12x150

12.5x125

 

 

 

14mm Thick

14x80

14x100

 

 

 

 

 

 

 

 

15mm Thick

15x100

15x120

 

 

 

 

 

 

 

 

16mm Thick

16x100

16x125

 

 

 

 

 

 

 

 

20mm Thick

20x80

20x100

 

 

 

 

 

 

 

 

The model of 1350 Round angle aluminium busbar

2mm Thick

R2x20

 

 

 

 

 

 

 

3mm Thick

R3x30

R3x40

R3x50

R3x60

R3x80

R3x100

R3x120

R3x160

4mm Thick

R4x25

R4x30

R4x40

R4x50

R4.7*x151

 

 

 

5mm Thick

R5x30

R5x35

R5x40

R5x50

R5x60

R5x120

 

 

6mm Thick

R6x50

R6x60

R6x80

R6.3x63

R6x100

R6x120

R6x140

R6x160

8mm Thick

R8x40

R8x50

R8x60

R8x63

R8x80

R8x100

 

 

10mm Thick

R10x50

R10x60

R10x80

R10x100

R10x120

R10x125

R10x170

R10.4x25

12.5mm Thick

R12.5x80

R12.5x125

 

R16x120

 



 

 

 

Get In Touch,Let's talk

Hello! If you are interested in our products and leave your demand, we will give you an accounting quotation in time.
Or you can send your request to our email address: info@chalcoaluminum.com

Send Your Request
  • 0086-371- 55689814 55686476
  • info@chalcoaluminum.com
  • 126#4 Building A,No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan
Social touch

contact us
Get a quote Leave Message
Hi,may I help you with products, price, etc?